manualshive.com logo in svg

LINET ELEGANZA 1, Инструкция по использованию и техническое описание, Страница: 60 / 70

Поделиться
Скачать
LINET ELEGANZA 1 Скачать руководство пользователя страница 60

                 

                D9U001GT0-0101_09

60

Fig. Urine bottle holder – correct fitment

Fig. Position of Urinary bag holder

15.3 Name holder

Name holder is used for placing patient’s name on it. Name holder must be placed under the head board or foot board handles so it 

will not collide with movable parts of the bed. This must be verified after installation of name holder.

15.4 Urinary bottle holder

WARNING!

Risk of collision when folding down the siderails!

► 

Ensure the neck of the bottle is facing to foot or head end of the bed so it will not collide when folding down the  

 

 siderails.

15.5  Urinary bag holder (optional)

Urinary bag holders are situated on both sides of thighrest section of the mattress support platform.

15.6 Eleganza Protector®

WARNING!

Risk of injury due to patient falling out of bed!

► 

Ensure that Eleganza Protector® is securely anchored to the bushing.

► 

To check stability, push the protector up without touching the release button.

► 

Always check that the siderail is properly locked.

WARNING!

Risk of damage to the bed or patient injury!

►  Do not mount head board or foot board to accessory bushing (3).

►  Do not mount lifting pole to accessory bushing (3).

►  Do not use protector with bed extension.

Содержание ELEGANZA 1







































































Отзывы:

Нет отзывов