manualshive.com logo in svg

LINET ELEGANZA 1, Инструкция по использованию и техническое описание, Страница: 44 / 70

Поделиться
Скачать
LINET ELEGANZA 1 Скачать руководство пользователя страница 44

                 

                D9U001GT0-0101_09

44

12.2 ACP – Attendant Control Panel

ACP Attendant Control Panel is main control panel of the bed. Nurse controller can be placed in the shelf. We recommend placing 

ACP panel on the head board or foot board or hold it in the hands while controlling the bed.

Fig. ACP - Attendant Control Panel

1. 

Lock LEDs

2. 

Lock Buttons

3. 

Thighrest Positioning Buttons

4. 

Backrest Positioning Buttons

5. 

Height Adjustment Buttons

6. 

Autocontour Buttons (simultaneous setting of back- and thighrest)

7. 

Foot Control Lock LED

8. 

Foot Control Lock Button

9. 

Trendelenburg Tilt Button (mattress platform tilt only)

10. 

Anti-Trendelenburg Tilt Button (mattress platform tilt only)

11. 

CPR (Resuscitation) Position Button

12. 

Trendelenburg Position Button (optional)

13. 

Cardiac Chair Position Button

14. 

Accumulator Charge Status LED (only for beds with backup accumulator)

15. 

Mains Power LED

16. 

Central STOP Button

17. 

Activating GO Button

To set positions:

► 

Activate the keypad by pressing the GO button.

► 

Press and hold corresponding button until required position is reached.

12.2.1 Central STOP Button

The central STOP button 16 immediately interrupts all bed movements.

Pressing central STOP button 16 for at least 0.3 seconds immediately stops all electronic bed movements.

NOTE:

 The bed can be stopped by pressing two different buttons even on two different controllers. If the press of the buttons is 

longer than 0,5 second the bed will stop all the movements immediately. 

Содержание ELEGANZA 1







































































Отзывы:

Нет отзывов