manualshive.com logo in svg

LINET ELEGANZA 1, Инструкция по использованию и техническое описание, Страница: 53 / 70

Поделиться
Скачать
LINET ELEGANZA 1 Скачать руководство пользователя страница 53

D9U001GT0-0101_09

           

           53

The split plastic siderails are components of the bed, the siderails cannot be removed.

Fig. Releasing mechanism of the split plastic siderails

To fold siderails down:

► 

Take hold of the siderail’s top bar and push towards mattress  

 

platform 1.

► 

Pull out locking mechanism 2 to unlock.

► 

Fold siderail up or down 3 as required. Do not let the siderail  

 

fall down when it is unblocked.

► 

The siderail will automatically lock in its place when folded up  

 

(you will hear audible ‘click’).

NOTE

:  In certain cases (e.g. when there is no weight on the side-

rails), it is possible to unlock the split plastic siderail only be pulling 

out the locking mechanism 2. This does not mean that the mechanism 

is faulty. The manufacturer recommends always using the procedure 

described above.

To fold siderails up:

► 

Grip the siderail by the upper part for its handle.

► 

Pull siderail up until it latches.

► 

The locking of each siderail is indicated by an audible ‘click‘ 

when locked in place.

► 

Ensure that the siderail is locked properly.

12.8.3 Split Plastic Siderails (SR22)

WARNING

!

Risk of injury due to patient falling out of bed!

► 

Ensure that folded-up siderails are securely anchored.

► 

Press against siderails from inside in order to check stability.

 

► 

Hospital personnel are responsible for ensuring siderails are folded-up when the bed is occupied.

12.8.4 Full length siderails

The full length siderails are components of the bed. The siderails cannot be dismounted. The hospital personnel is responsible that 

siderails are locked in the highest position when the patient is on the bed.

To fold siderail down:

► 

Grab siderail by its top partition and lift it up 1.

► 

Pull and hold locking mechanism of the siderail toward the middle of the bed 2.

► 

Fold siderail down 3 as required.

► 

Repeat on the other side of the siderail.

► 

To fold siderail up push the lift the siderail up. Siderail will click into place and lock automatically.

Fig. Releasing mechanism of the full length siderails

Содержание ELEGANZA 1







































































Отзывы:

Нет отзывов