manualshive.com logo in svg

LINET ELEGANZA 1, Инструкция по использованию и техническое описание, Страница: 43 / 70

Поделиться
Скачать
LINET ELEGANZA 1 Скачать руководство пользователя страница 43

D9U001GT0-0101_09

           

           43

12 Manipulation

WARNING!

Risk of injury when adjusting the bed!

► 

Ensure there are no body parts between the mattress platform elements and the mattress platform frame when  

 

 

adjusting the bed.

► 

Ensure there are no body parts below the mattress platform frame before adjusting the bed.

 

     ►  Secure or remove any items on the bed.

The bed is operated by different control elements.

Control elements:

► 

Supervisor board

► 

Attendant Control Panel

► 

Handset without illuminated keyboard

► 

Handset with illuminated keyboard

► 

Handset with adapter for easy connection (Plug and Play)

► 

Controls integrated in siderails

Disabling individual functions on the Attendant Control Panel affects all of the control elements.

If the bed does not react to individual position settings:

► 

Check whether the function is disabled on the Attendant Control Panel.

12.1 MiniACP (Supervisor board)

The supervisor board is an optional control element. The supervisor board is located at the foot end of the bed.

Fig. MiniACP (Supervisor board)

1. 

Accumulator Charge Status LED

2. 

Central STOP Button

3. 

Activating GO Button

4. 

Thighrest Lock Button

5. 

Thighrest Lock LED

6. 

Backrest Lock Button

7. 

Backrest Lock LED

8. 

Height Lock Button

9. 

Height Lock LED

10. 

Anti-Trendelenburg Tilt Button

11. 

CPR Button

12. 

Trendelenburg Position Button (optional)

To set positions:

► 

Activate the keypad by pressing the GO button.

► 

Press and hold corresponding button until required position is reached.

Содержание ELEGANZA 1







































































Отзывы:

Нет отзывов