URRACO 75 D
S
ERVICE GUIDELINES
Managing director
LINDNER
Mobile Shredder GmbH
Industriestrasse 1A
D-99820 Hörselberg / Eisenach
Service hotline:
+49 (0) 36920 - 7269 - 600
Manuel Lindner
Gerhard Buhl
Walter Geiger
Page - 10 - of - 38 -
The oil change intervals for the gear and hydraulic oil can be extended subject to written
approval of our Service Department if the results of an oil analysis (laboratory report) have
been submitted.
You can have the oil analysis
conducted yourself in a certified laboratory and then send us the laboratory report, or
further advice and information concerning the oil analysis can be found at
www.wearcheck.de.
The maximum oil change intervals are 1000 h and must on no account be exceeded.
1.7.-4
Initial Maintenance Work
When servicing the drive engine, observe the separately enclosed operating
and maintenance manual of the engine manufacturer!
ATTENTION: Mandatory!
After
100 operating hours
, the customer must order an inspection to be
performed by LINDNER.
After 100 -200 operating hours, the engine inspection has to be performed by
the responsible, authorised CAT dealer or OEM dealer to ensure the warranty
for the engine. The customer must order this inspection independently.
All maintenance work may only be executed by trained and instructed
personnel. Before carrying out servicing work, you must always read the safety
instructions.
The initial maintenance tasks are performed 16 hours (2 working days) and 100 - 200 hours
(1 month) after installation and commissioning of the machine.
The daily and the regular maintenance tasks are carried out according to section 1.7-5.
