URRACO 75 D
S
ERVICE GUIDELINES
Managing director
LINDNER
Mobile Shredder GmbH
Industriestrasse 1A
D-99820 Hörselberg / Eisenach
Service hotline:
+49 (0) 36920 - 7269 - 600
Manuel Lindner
Gerhard Buhl
Walter Geiger
Page - 26 - of - 38 -
For draining the coolant, use the drain plug on the right hand engine side of the shredder.
The coolant is pumped out by means of the hand-operated pump. Proceed as follows:
1.
Remove the protective cap form the drain socket.
2.
Connect the hose of the hand-operated pump to the drain socket and hang the
second hose into a suitable container (such as a barrel).
3.
Pump out the coolant.
4.
After all coolant has been pumped out, disconnect the hose from the drain socket and
screw the protective cap back on.
1.7.-12
Changing the Air Filter
The air filter consists of two elements: main element and safety element.
The main air filter element can be cleaned up to three times before it has to be replaced. The
main element must be changed at least every six months, irrespective of the operating hours.
The safety element must be changed at least after the main element has been changed 5
times, or every 2 years.
When cleaning filter elements, carefully check for cracks in the filter material. Clean the filter
according to these instructions.
