Lincoln ZPU 08 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 57

Lincoln ZPU 08 Скачать руководство пользователя страница 16

Operating Instructions

Pump ZPU 08 ATEX

810-53711-1

Page 16 / 57

Rev.: 003
31/07/2017

2.18.

Persons authorized to operate the pump

2.19.

Operator

A person who is qualified by training and experience to carry out the functions and
activities related to normal operation. This includes avoiding possible hazards that
may arise during machine operation.

2.20.

Specialist for maintenance and repairs in potentially explosive
atmospheres

A person who is qualified by training and experience to identify and assess
possible risks and hazards during work on the machine or partial components in
potentially explosive areas and to initiate suitable measures to prevent such risks.
The specialist has knowledge of the different ignition protection types, installation
procedures and zone divisions. He is familiar with the rules and regulations
relevant for his activities and explosion protection, in particular with ATEX directive
94/9 EG.

2.21.

Protection of special groups of persons

The respective legal employment restrictions do apply.

Persons with cardiac pacemakers and/or
metal implants

Magnetic fields existing in the environment of live conductors and motors may
present a hazard to above-mentioned persons. Should it be necessary for them to
access such areas, a doctor should be consulted beforehand, as health
impairments cannot be excluded generally.

«
...
14
15
16
17
18
...
»

Содержание ZPU 08


























































Отзывы:

Нет отзывов