Lincoln Quicklub 203 Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 36

Lincoln Quicklub 203 Series Скачать руководство пользователя страница 20

Subject to modifications

Owner Manual

Technical Description

2.1A-30001-H07

Page 20 of 36

LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259

Maintenance, Repair and Tests

Maintenance

The maintenance is essentially limited to refilling the res-
ervoir with clean lubricant in good time. However, check
regularly whether the lubricant is really dispensed to all
the lubrication points.

Also check the main lines and lubricant feed lines for
damage and replace them, if necessary.

6001a02

NOTE

Whenever work is done on the centra-
lized lubrication system, particular atten-
tion should be paid to absolute cleanli-
ness. Dirt in the system will cause prob-
lems.

For cleaning the system use benzine or petroleum. Do not
use tri-, perchloroethylene or similar solvents.
Also do not use polar organic solvents such as alcohol,
methylacohol, acetone or similar.

Pump Filling

6347b04

Fig. 26

Fill pump reservoir

6593b06

Fig. 27

Manual bottom filling of pump reservoir

2 l, 4 l , 8 l -

reservoirs

Fill the reservoir up to the ”Max.” mark via the filling nipple
(see Fig. 26), via the filling fitting for cartridges

(see Fig. 27) if

any, or via the upper filling opening.

It is possible to use greases up to penetration class NLGI 2 or
mineral oils of at least 40 mm²/s (cST).

6001a02

IMPORTANT

The grease or oil must be free from im-
purities and must not be liable to change
its consistency in the course of time.

6445b05

CAUTION!

Danger of squeezing in case of pumps to
be filled from the reservoir top:
Never put your hand into the open
reservoir while pump is running!

1013A94

CAUTION!

Risk of bursting if the reservoir is
overfilled.

When filling the reservoir by means of
pumps with a large delivery volume, do
not exceed the max. filling mark.

6001a02

NOTE

If the reservoir has been completely
emptied, the pump may require up to 10
minutes before it operates at full output.

Repair

Pump

Use only original Lincoln spare parts for repair on the
pumps.

The pump should be returned to the factory for warranty
work or major repairs.

«
...
18
19
20
21
22
...
»

Содержание Quicklub 203 Series





































Отзывы:

Нет отзывов