Subject to modifications
User Manual
LMC 1
9.3EN-98001-A07
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
Page 17 of 36
Progressive systems, continued
Operating mode
The following parameters are controlled or monitored for
progressive systems via the standard LMC 1
programming:
Variable:
- Pause time
- Time or cycle-dependent lubrication
- Monitoring time
Fixed:
- Filling time monitoring 15 min.
Connection
6611b06
Fig. 12
Signal input connection
A - External contact
1)
B – Metering device sensor
C – Low-level signal
D – High-level signal
E – Metering device sensor
F - Motor protection
G - Additional lubrication
H - Remote reset
1)
Time stop respectively lubrication stop
6612b06
Fig. 13
Control output (ACTUATOR) connection
Q1 - Pump
Q2 - System (ready for operation)
Q3 - Filling
Q4 - Reserved
Q5 - Reserve
PE - Protective earth conductor
L+ - Power supply
+
M - Power supply
–
