Lincoln Impinger 3262BWEC Скачать руководство пользователя страница 51

Impinger X2 –Operator Manual

 

51

LIMITED WARRANTY FOR COMMERCIAL PRODUCTS 
 
LIMITED WARRANTY

 

Lincoln Foodservice Products, LLC (“Lincoln”) warrants this

 

product to be free from defects in material and workmanship for a period of one (1) 

year from the date of purchase. 

During the warranty period, Lincoln shall, at Lincoln’s option, repair, or replace parts determined by Lincoln to be defective in material or 
workmanship, and with respect to services, shall re-perform any defective portion of said services. The foregoing shall be the sole obligation 
of Lincoln under this Limited Warranty with respect to the equipment, products, and services. With respect to equipment, materials, parts 
and accessories manufactured by others, Lincoln’s sole obligation shall be to use reasonable efforts to obtain the full benefit of the 
manufacturer’s

 

warranties. Lincoln shall have no liability, whether in contract, tort, negligence, or otherwise, with respect to non-Lincoln 

manufactured products. 

WHO IS COVERED

 

This Limited Warranty is available only to the original purchaser of the product and is not transferable.  

EXCLUSIONS FROM COVERAGE 

 

Repair or replacement of parts required because of misuse, improper care or storage, negligence, alteration, accident, use of 
incompatible supplies or lack of specified maintenance shall be excluded 

 

Normal maintenance items, including but not limited to, light bulbs, fuses, gaskets, O-rings, interior and exterior finishes,  
lubrication, conveyor belt, motor bushes, broken glass, etc. adjustments and calibrations for temperatures, speed and air flows 

 

Failures caused by improper or erratic voltages 

 

Improper or unauthorized repair 

 

Changes in adjustment and calibration after ninety (90) days from equipment installation date 

 

This Limited Warranty will not apply to any parts subject to damage beyond the control of Lincoln, or to equipment which has been 
subject to alteration, misuse or improper installation, accidents, damage in shipment, fire, floods, power changes, other hazards or acts 
of God that are beyond the control of Lincoln 

 

This Limited Warranty does not apply, and shall not cover any products or equipment manufactured or sold by Lincoln when such 
products or commercial equipment is installed or used in a residential or non-commercial application. Installations not within the 
applicable building or fire codes render this Limited Warranty and any responsibility or obligations associated therein null and void.  
This includes any damage, costs, or legal actions resulting from the installation of any Lincoln commercial cooking equipment in a non-
commercial application or installation, where the equipment is being used for applications other than those approved for by Lincoln.  

 

LIMITATIONS OF LIABILITY

 

The preceding paragraphs set forth the exclusive remedy for all claims based on failure of, or defect in, products or services sold hereunder, 
whether the failure or defect arises before or during the warranty period, and whether a claim, however instituted, is based on contract, 
indemnity, warranty, tort (including negligence), strict liability, implied by statute, common-law or otherwise , and Lincoln its servants and 
agents shall not be liable for any claims for personal injuries, incidental or consequential damages or loss, howsoever caused. Upon the 
expiration of the warranty period, all such liability shall terminate. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF 
ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL, IMPLIED OR STATUTORY  NO IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE SHALL APPLY. LINCOLN DOES NOT WARRANT ANY PRODUCTS 
OR SERVICES OF OTHERS. 

REMEDIES

 

The liability of Lincoln for breach of any warranty obligation hereunder is limited to: ( i )  the repair or replacement of the equipment on which 
the liability is based, or with respect to services, re-performance of the services; or (ii) at Lincoln’s option, the refund of the amount paid for 
said equipment or services. 
Any breach by Lincoln with respect to any item or unit of equipment or services shall be deemed a breach with respect to that item or unit or 
service only 

WARRANTY CLAIM PROCEDURE

 

Customer shall be responsible to: 

 

Immediately advise the Dealer or Lincoln’s Authorized Service Agent of the equipment serial number and the nature of the problem. 

 

Verify the problem is a factory responsibility.  Improper installation or misuse of equipment, are not covered under this Limited 
Warranty. 

 

Cooperate with the Service Agency so that warranty service may be completed during normal working hours. 

 

Travel Time not to exceed two hours and mileage not to exceed one hundred (100) miles. 

GOVERNING LAW

 

Limited Warranty shall be governed by the laws of the state of Delaware, USA, excluding their conflicts of law principles. The United Nations 
Convention on Contracts for the International Sale of Goods is hereby excluded in its entirety from application to this Limited Warranty 
 
 
 
Lincoln Foodservice Products, LLC  
1111 North Hadley Road 
Fort Wayne, Indiana 46804 

USA 

www.lincolnfp.com  

Содержание Impinger 3262BWEC





















































Отзывы: