Lincoln Impinger 3262BWEC, Руководство оператора

Страница: 5 / 52

Impinger X2 –Operator Manual 5
MODELS
Single Oven Double Oven
Conveyor Number &
Belt Width per Oven
Model Configure
Total
Conveyors
Configure
Total
Conveyors
Upper Lower C.F. Unit Wt. (lbs.) Ship Wt. (lbs.)
3262FWMC Standard 2 Standard 4
2 ea. -
16”
1 ea. -
32”
160 1400 1500
3262TWAC Upper Belt Split 3 Upper Belt Split 6
2 ea. -
16”
2 ea. -
16”
160 1400 1500
3262BWEC Lower Belt Split 3 Lower Belt Split 6
2 ea. -
16”
1 ea. -
32”
160 1400 1500
3262SWIC Both Belts Split 4 Both Belts Split 8
2 ea. -
16”
2 ea. -
16”
160 1400 1500
3270FWMC Standard 2 Standard 4
1 ea. -
16”
1 ea. -
32”
160 1400 1500
3270TWAC Upper Belt Split 3 Upper Belt Split 6
2 ea. -
16”
1 ea. -
32”
160 1400 1500
3270BWEC Lower Belt Split 3 Lower Belt Split 6
2 ea. -
16”
2 ea. -
16”
160 1400 1500
3270SWIC Both Belts Split 4 Both Belts Split 8
2 ea. -
16”
2 ea. -
16”
160 1400 1500
GAS PRESSURE CONVERSION CHART
Inches of
Water Column
KPa m-Bar
Millimeters of
Water Column
3.5 0.87 8.70 88.9
4.5 1.12 11.2 114.3
7 1.74 17.40 177.8
10 2.48 24.87 254.0
10.5 2.61 26.11 266.7
11 2.73 27.36 279.4
14 3.48 34.81 355.6
14.5 3.61 36.05 368.3
** NOTE: For proper operation, the gas valve requires a nominal inlet pressure of 7
inches of H
2
O for natural gas and 11 inches of H
2
O column for L.P. gas. A minimum
inlet pressure of 1.0 inch of H
2
O column above the manifold setting (NAT. manifold
3.5” H
2
O, L.P. manifold 10” H
2
O) must be maintained with no pressure drop from the
no load to full load condition. The maximum inlet pressure must be maintained at or
below ½ PSIG (14.5 inches H
2
O column). Refer to the chart on the left for pressure
conversions.
Electrical Supply for Australia:
Single Phase: 240 VAC, 50 Hz / 20 Amp; one neutral & one earth/ground.
Three Phase: 240/415 VAC / 20 Amp; three active, one neutral & one earth/ground.
All ovens require separate service and dedicated neutral.
NOTE: Do not install the (these) oven(s) in any area with an ambient temperature in
excess of 95°F / 35° C. Doing so will cause damage to the unit.