Lincat Opus 800 OG8115/OP, Инструкция для пользователя, по установке и обслуживанию

Страница: 16 / 20

IS 681 ECN 4301 Page 16 of 20
BASKET LOADS
Overloading the basket reduces the fryer output of cooked product and will result in
uneven cooking. It also increases the possibility of surge boiling (the oil may suddenly
boil over when the basket is placed into the tank).
Food that is over-wet increases the possibility of surge boiling.
FILTERING, OIL CHANGE AND CLEANING INSTRUCTIONS
A small amount of oil will remain in the bottom of the oil bucket after the pump
has stopped.
FILTERING THE OIL
Prior to operating the filtration pump ensure that all the parts shown below are clean and
free of debris. Fit the filter bag onto the wire frame and correctly located in the
drain bucket. Check that the stainless basket is placed in the filter bag and that the suction
pipe is positioned in the bracket as shown below. Check that the oring seal is fitted to the
suction pipe and is in good condition.
FZ101140
Stainless Drain Basket
FZ101159
Filter Bag
FZ101143
Filter Bag Holder
FZ214015
Suction Pipe