Liko Uno 200, Руководство по обслуживанию

Страница: 25 / 38

ServiceManual Uno™200 mobile lift (3EN500402 Rev. 5) 25 www.liko.com
Charger Socket Connection
Anslutningskabel för laddning
Assembly Instruction
Monteringsanvisning
Prod. No. 20190079
3SE690237-01
2013-01-21
© Copyright Liko AB
www.liko.com
Tools required:
NOTE
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
- Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.
5.530
Contains: Qty:
Cable
CBJH
1
Fits:
Uno 200 (Control Unit 20190060)
Sabina 200 (Control Unit 20190060)
1: Hand control
2: Base-motor cable
3: Lift motor cable
4.
5.
Activate the emergency
stop.
1. 2. 3.
5 mm
T20
6.
Lift the PCB and unplug the connector from
the charger cable. Pull out the charger cable
from the housing and insert the new one in
the same way.
Before assembly:
ESD protection is required.
7.
The following should be observed when reassembling
- Please observe the guides are in the respective holes in the PCB, when placing the PCB in the housing.
- Wires should not be pinched
- Connectors should not be bended or physically stressed. Reassemble the Control Unit.
1
2
3
4
5
6
7
- Lift motor cable to socket 1
- Base-motor cable to socket 2
- Hand control to socket 3.
3 2 1