Liko Uno 200, Руководство по обслуживанию

Страница: 19 / 38

ServiceManual Uno™200 mobile lift (3EN500402 Rev. 5) 19 www.liko.com
Charger CH01
Laddare CH01
Assembly Instruction
Monteringsanvisning
Prod. No. 21090025
3SE650232-04
2010-04-07
www.liko.com
© Copyright Liko AB
5.368
3.
2.
4.
5.
6.
The lift does not operate when the charger cable is plugged into an electric socket!
* Plug adaptor units:
Australian plug EU plug
Contains:
Charger Uno 200 1
Adaptor EU Uno 200 1
Adaptor UK Uno 200 1
Adaptor US Uno 200 1
Adaptor AU Uno 200 1
Fits:
Uno 200
Sabina 200
Viking S
Viking XS
Likorall 200
NOTE
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
- Repairs and maintenance may only be performed by personnel authorized by Liko/Hill-Rom and using original Liko spare parts.
3.
2.
4.
6.
5.
1.
7.
1. Check to ensure that the emergency stop button is not pressed in
during charging.
2. Connect the charger cable to the charger socket under the control
unit.
Likorall 200: Place the hand control in the charging station.
3. Slide on the Plug adaptor unit
* to the Charging module.
4. Connect the charger to a 100-240 V AC electric socket.
5. When the charger is connected a LED indicates:
-yellow light indicates charging
-green light indicates maintenance charging.
6. A yellow LED at the control unit lights when the charger is
connected to the electric socket.
Likorall 200: A LED on the hand control will light up and indicates
that the charger is connected to a power source.
7. Likorall 200: Charging starts automatically and a yellow LED on the
lift unit indicates that the batteries are charging. When the battery
is fully charged, the yellow LED turns off.
UK plug US / Japan plug