Lika EM58 MB, Руководство пользователя

Страница: 43 / 92

ES58 • EM58 MODBUS®
selected the decimal value which results from the binary sequence of the sixteen
bits in the
Control Word [0009 hex]
register will appear in the field on the left
side. When the function is enabled, the text of the label is coloured yellow. For
more information refer to the
Watchdog enable
parameter on page 74.
Execute preset
This button allows to activate the preset function in order to set the output
value to the value entered next to the
Preset value
parameter (see on page 41).
The
Execute preset
button executes the whole sequence of preset setting
commands: activation of the Perform counting preset bit and registers setting;
deactivation of the
Perform counting preset
bit and registers setting; save of
parameters. While the commands are being executing, the background of the
button is coloured orange and the decimal value which results from the binary
sequence of the sixteen bits in the
Control Word [0009 hex]
register is
updated in real time in the field under the label (if the
Real values
check box is
selected). As soon as the operation is carried out, the value in the
Current
position
field is the same as the value entered in the
Preset value
parameter
(you are not required to press the Read Params button in order to refresh the
current position value). For more information refer to the Perform counting
preset
parameter on page 74.
Upload defaults
This button allows to activate the function meant to upload the default
parameters. It executes the whole sequence of default parameters upload
commands: activation of the
Load default parameters
bit and registers
setting; deactivation of the
Load default parameters
bit and registers setting;
save of parameters). While the commands are being executing, the background
of the button is coloured orange and the decimal value which results from the
binary sequence of the sixteen bits in the
Control Word [0009 hex]
register is
updated in real time in the field under the label (if the
Real values
check box is
selected). As soon as the operation is carried out, the value in the parameter is
updated automatically (you are not required to press the
Read Params
button
in order to refresh the values that are currently set). For more information refer
to the
Load default parameters
parameter on page 74.
WARNING
The execution of this command causes all parameters which have been set
previously to be overwritten!
MAN ESx58x_EMx58x MB E 1.3 Quick reference 43 of 92