Lika EM58 MB, Руководство пользователя

Страница: 40 / 92

ES58 • EM58 MODBUS®
5.3.4 Reading / writing the Holding Registers
In the largest group box on the right of the programming interface, the Holding
Registers are available. The items in this group box allow to read in or write into
the working parameters of the device, by pressing the
Read Params
and
Write
Holding
buttons respectively, they are available in the
DEVICE
group box. The
Holding Registers are fully described in the “7.1.1 Machine data parameters
(Holding registers)” section on page 65 in this manual.
WARNING
If the
Auto save
check box at the bottom of the page is selected (see on page
44), all the parameters of the Holding registers are stored automatically and
instantaneously as soon as they are set: check box settings are saved as soon as
the check box is selected / deselected; the write registers are saved as soon as
you press the
ENTER
key in the keyboard or place the cursor anywhere outside
the field after setting the value.
MAN ESx58x_EMx58x MB E 1.3 Quick reference 40 of 92