ES58 • EM58 MODBUS®
Auto save
It enables / disables the autosave function.
If the
check box is selected, all the parameters of the Holding
registers are stored automatically and instantaneously as soon as they are set:
check box settings are saved as soon as the check box is selected / deselected;
the write registers are saved as soon as you press the
ENTER
key in the keyboard
or place the cursor anywhere outside the field after setting the value.
If the
check box is not selected instead, you must press the
button to store the parameters permanently on the EEPROM after
setting.
Save parameters
This button is active only if the
check box is not selected. It allows to
activate the function meant to store the parameters permanently on the
EEPROM. It executes the whole sequence of data store commands in order to
store the parameters permanently on the EEPROM: activation of the
bit and registers setting; deactivation of the
and registers setting). While the commands are being executing, the background
of the button is coloured orange and the decimal value which results from the
binary sequence of the sixteen bits in the
updated in real time in the field under the label (if the
Real values
check box is
selected). For more information refer to the
page 74.
WARNING
check box to activate the autosave function. If the check
box is selected, all the parameters of the Holding registers are stored
automatically and instantaneously as soon as they are set and you are never
required to press the
button: check box settings are saved as
soon as the check box is selected / deselected; the write registers are saved as
soon as you press the
ENTER
key in the keyboard or place the cursor anywhere
outside the field after setting the value. For more information please refer to the
item in the previous page.
MAN ESx58x_EMx58x MB E 1.3
Quick reference
44 of 92
Содержание EM58 MB
Страница 90: ...This page intentionally left blank...
Страница 91: ...This page intentionally left blank...