UMX-TP-TX100R
Programmer’s Reference Manual
Section 4. Programmers reference
Page 25 / 43
4.6.1. Switch one input to one output
Description
: This command switches the output to an input.
Format
Example
Command {<in>@<out>
●<A/V/AV>
}
→ {2@1 av}
Response (O<out²>●I<in²>
●<A/V/AV>
)CrLf
← (O01 I02 AV)CrLf
Legend:
<A/V/AV>:
Layer select:
A: Audio layer
V: Video layer
AV: Audio&Video layer
<in> must be 1,2 or 3.
1: HDMI input
2:VGA input
3: automatic source selection
Explanation:
The example shows how to connect both Audio and Video from input 2 to
output 1.
Info:
If the command is used without the
<A/V/AV> parameter, both layers are switched.
Info:
UMX-TP-TX100R does not support disconnecting command. {0@<out>}
4.6.2. View video connection on the output
Description
: This command shows the video connection status of the output.
Format
Example
Command {?<out>}
→ {?1}
Response
(O<out²>●I<in²>)CrLf
← (O01●I01)CrLf
Legend:
Please read section
4.6.1
on page
25
.
<out> must be 1, 01 or 001.
Explanation:
The example shows that video output is connected to input 1
Info:
This command kept for legacy purposes; to get information about all layers, please use
the multilayer command:
4.6.3
on page
25
.
Info:
The response shows connections only for the video layer
.
4.6.3. View all connections on the output
Description
: This command displays the connections on a single or multiple layers.
Format
Example
Command {VC
●<A/V/AV>
}
→ {vc●av}
Response
(ALLV●<in²>)CrLf
(ALLA●<in²>)
CrLf
← (ALLV●01)CrLf
(ALLA●01)CrLf
Legend:
Please read section
4.6.1
on page
25
.
Explanation:
The response contains all the connections, if both layers are selected the
response is two messages.
The example shows that output 1 Audio & Video are connected to input 1
Audio & Video.
Info:
If the command is used without the
<A/V/AV> parameter, the response shows only the
video layer connections.
Содержание UMX-TP-TX100R
Страница 1: ...UMX TP TX100R Programmer s Reference Manual ...
Страница 2: ......
