Lightware UMX-TP-TX100R, Руководство программиста

Страница: 31 / 43

UMX-TP-TX100R
Programmer’s Reference Manual
Section 4. Programmers reference Page 31 / 43
4.8.3. Set analog timing properties
Description : This command changes the setup of the analog timing data.
Format Example
Command {:ANALOG#<in>@<S/A>I=
<PHS>;<FHS>;
<HS>;<VS>;
<HP>;<VP>;}
→ {:analog#2@si=
10;2160;
1600;1200;
455;41;}
Response (DVII#<in>@<S/A>I=
<PHS><FHS>;
<HS>;<VS>;
<HP>;<VP>;
<LCF>;
<FORM>;<VSP>;<HSP>;
<FPS>;
)CrLf
← (ANALOG#2@SI=
10;2160;
1600;1200;
455;41;
1124;
P;-;-;
50;)CrLf
Legend: <S/A>: Affected ports:
S = single selected input
A = all inputs
<PHS> Phase
<FHS> Full Horizontal Size
<HS> Horizontal Size
<VS> Vertical Size
<HP> Horizontal Position
<VP> Vertical Position
Info: The following parameters cannot be set, they only appear in response.
<LCF> Full Vertical Size (Line Count per Field)
<FORM> Format: Progressive or Interlaced
<VSP> Vertical Sync. Polarity
<HSP> Horizontal Sync. Polarity
<FPS> Frame Per Sec in Hz
4.8.4. Query analog timing properties
Description : Check analog timing data of the input ports.
Format Example
Command {:ANALOG#<in>@<S/A>I=?}
→ {:analog#2@si=?}
Response (ANALOG#<in>@<S/A>I=
<PHS>;<FHS>;
<HS>;<VS>;
<HP>;<VP>;
<LCF>;
<FORM>;<VSP>;<HSP>;<FPS> )CrLf
← (ANALOG#2@SI=
0;2160;
1600;1200;
455;41;1242;
P;+;+;60;)CrLf
Legend: Please read section 4.8.3 on page 31 .
4.8.5. Reset analog timing properties
Description : This command resets the analog timing properties.
Format Example
Command {:ANALOG#<in>@<S/A>I=RESET}
→ {:analog#2@si=reset}
Response (ANALOG#<in>@<S/A>I=
<PHS>;<FHS>;
<HS>;<VS>;
<HP>;<VP>;<LCF>;
<FORM>;<VSP>;<HSP>;<FPS>)CrLf
← (ANALOG#1@SI=
0;2160;
1600;1200;
455;41;1242;
P;+;+;60;)CrLf
Legend: Please read section 4.8.3 on page 31 .