Page 74 / 109
Info:
As the matrix switcher reports status change nothing will happen if you select the
same EDID to a given input or connect the same display device to a given output!
5.3.2. Advanced EDID Manager
The Lightware Advanced EDID Manager is integrated into the Lightware Matrix
Controller software. By clicking on the green arrow, the editor area rolls down.
When the user enters the menu first, an empty EDID is loaded into the editor’s
memory.
All EDID in the matrix memory can be edited in the following way:
Step 1.
Right click on the desired EDID to be loaded to the EDID Manager.
Step 2.
In the pop-up menu, click on “Edit EDID” The editor area automatically rolls
down, and the EDID is loaded into the editor area.
5.4.
Terminal menu
This general-purpose serial terminal is
intended mainly for test and debug
purposes. After a successful connection
to a router this terminal can be used
either via serial or TCP/IP connection. All
commands can be used here that were
discussed
in
the
Programmer’s
reference section. The text can be typed
directly.
By default commands are surrounded by
framing brackets. Every sent command
and every received response gets an
arrow (-> or <-) prefix, and has different
font colors in order to help distinguishing.
5.5.
STATUS menu
Basic device information, the installed cards’ firmware, hardware revisions and the
router’s health are displayed in this window.
