MX32x32DVI-HDCP-Pro and HDMI-Pro
User’s Manual v1.0
Page 29/ 109
3.2.3. SWITCHING
Creating a connection or multiple connections in TAKE mode
1.
First press and release the selected source button. The pressed source
button and all destination buttons, which are currently connected to this
source, will light up. The remaining unlit destination buttons are not
connected to this source. This is an informative display about current status
of the selected input. (view only)
2.
Press and release the selected unlit destination button or buttons, which
have to be connected to the selected source. The preselected destination
button(s) start(s) blinking.
3.
Press and release TAKE button to execute the tie or ties. Now the selected
input is switched to the selected output or multiple outputs.
Deselecting or muting in TAKE mode
1.
First press and release the selected source button. The pressed source
button and all destination buttons, which are currently connected to this
source, will light up. The remaining unlit destination buttons are not
connected to this source. This is an informative display about current status
of the selected input. (view only)
2.
Press and release the selected, green illuminated destination button which
has to be disconnected from the selected source. The corresponding
button(s) of the pressed destination or multiple destinations will turn dark.
3.
Press and release TAKE button to execute disconnection.
Info:
Deselected destinations are disconnected from any source, thus output devices will
display black image or "no signal" message and may automatically turn off.
Info:
Multiple switching and deselecting actions can be done simultaneously, during only
one TAKE action.
Creating a connection in AUTOTAKE mode
1.
Press and release the selected destination button. The pressed destination
button, and the actually connected source button are illuminating green. If no
source is connected, (the output is muted) no source button will light up.
2.
Press and release the selected input button. The switch action will be
executed immediately. Switching between sources to the selected
destination can be done directly.
Deselecting or muting in AUTOTAKE mode
1.
Press and release the selected destination button. The pressed destination
button, and the actually connected source button are illuminating green. If no
source is connected, (the output is muted) no source button will light up.
2.
Press and release the active, green illuminating source button. The output is
muted.
Info:
Deselected destinations are disconnected from any source, thus output devices will
display black image or "no signal" message and may automatically turn off.
