MX32x32DVI-HDCP-Pro and HDMI-Pro
User’s Manual v1.0
Page 45/ 109
Example:
Set default input names:
Example:
Set default output names:
Example:
4.1.16. Query IP settings
Description:
IP setup can be retrieved
from the router with this command.
Legend:
Identifier
Description
Default value
<id>
0-fix IP, 7-DHCP
0
<ip_address>
IP address
192.168.254.254
<port>
IP port of the router
10001
<mask>
subnet mask
255.255.0.0
<gateway>
gateway address
0.0.0.0
Example:
Legend:
The router has a fix 192.168.2.106 IP address on the 255.0.0.0 subnet
with a gateway on 192.168.2.1 and communicates over port no. 10001.
4.1.17. Reload factory default IP settings
Description:
After
issuing
this
command (either over serial or IP) the
router will reload the factory default IP
setup.
Parameters after successful command execution:
→
{
PNAME
#2=!}
←
(
PNAME
#2=Preset 2)CrLf
→
{
INAME
#<id>=!}
←
(
INAME
#<id>=Input<id>)CrLf
→
{
INAME
#2=!}
←
(
INAME
#2=Input 2)CrLf
→
{
ONAME
#<id>=!}
←
(
ONAME
#<id>=Output<id>)CrLf
→
{
ONAME
#2=!}
←
(
ONAME
#2=Output 2)CrLf
→
{IP_CONFIG=?}
←
(IP_CONFIG=<id>
●
<ip_address>
●
<port>
●
<mask>
●
<gateway>)CrLf
→
{IP_CONFIG=?}
←
(IP_CONFIG=0 192.168.2.106 10001 255.0.0.0 192.168.2.1)
CrLf
→
{IP_CONFIG=
!
}
←
(Changing IP configuration…)CrLf
…4 second delay…
… Beep Beep sound from the router…
←
(DONE!)CrLf or (FAILED!)CrLf
Parameter
Value
IP address
192.168.254.254
port number
10001
Subnet mask
255.255.0.0
Gateway
0.0.0.0
