Lightware MMX4x2 Series страница 65 Скачать руководство пользователя

Страница: 65 / 172

5. Software Control - Lightware Device Controller

MMX4x2 series – User's Manual

Applied firmware package: v1.6.0b19 | LDC software: v2.5.13b5

MAC Filter Allowlist

Another level of the security is the MAC Filtering tool. You can create a list of network devices based on the

MAC address that are allowed:

#macfilter

▪

Controlling the device (Send option), or

▪

Querying parameters (Receive option) to/from the Lightware device.

Do not forget to press the

Apply changes

button to store the new settings.

ATTENTION!

The first three lines (as seen in the picture) are factory default values and they are necessary

for the proper working.

ATTENTION!

If the device is installed in a network where it gets IP address from a DHCP server and you

plan to use the MAC filtering, make sure the MAC address of the DHCP server is added to the whitelist.

Otherwise, the device will not get an IP address and will be unreachable.

5.11.3.

Front Panel

Front panel tab in the Settings menu

Front Panel Settings

▪

Lock front panel:

When this option is enabled, the front panel buttons are locked and they can be unlocked

by disabling this option, pressing the

OUT2 Video select

and the

Set audio config

buttons together or with

LW3 protocol command.

▪

Dark mode enable:

When Dark mode is enabled, all LEDs on the unit are switched off after 1 minute

(by default) if no buttons are pressed. Pressing any button brings back the status info on the LEDs

without performing the function of the button itself.

#darkmode

The further options can be used to set the default function for the buttons or disable and use them for

another function by the Event manager.

5.11.4.

Backup

Details about this function can be found in the

Configuration Cloning (Backup Tab)

section.

5.11.5.

System

System tab in Settings menu

Cleartext Login (Login Settings)

DIFFERENCE:

This feature is available only from FW package v1.6.0b19.

This cleartext login tool allows setting a password for login, thus the device will not accept any command

coming from a control interface (RS-232, Ethernet, etc…) without login. The device will be visible in the Device

Discovery window (as the device type and the serial number can be queried without login), but connection

can be established only after successful login. The login is valid until a TCP socket break in case of Ethernet

connection.

#login

INFO:

The login password is erased and the login is disabled when restoring the factory default values.

Further functions

▪

Download system log

- saving the file of the device.

▪

Load factory defaults

- recalling factory defaults settings and values. All factory default settings are

listed in the

Factory Default Settings

section.

▪

Reboot

- rebooting the system.

#factory

#log

#systemlog

#reboot #restart



 



Содержание MMX4x2 Series













































































































































































Результаты поиска

Содержание MMX4x2 Series

Отзывы:

Похожие инструкции для MMX4x2 Series

Бренды по названию

Популярные бренды

Lightware MMX4x2 Series, Руководство пользователя

Результаты поиска

Содержание MMX4x2 Series

Отзывы:

Похожие инструкции для MMX4x2 Series

Бренды по названию

Популярные бренды