Lightning SA MultiCom, Руководство пользователя

Страница: 61 / 172

MultiCom Firewall User’s Manual 61
WAN Static IP Easy Setup
2. Enter in the username that your Internet Service Provider gave to you.
3. Enter in the password that your Internet Service Provider gave to you.
4. Optionally enter in your local domain name. (This will become the default
suffix used for networking activity.)
5. Enter in the IP Address of the broadband modem that is your PPTP Server.
6. Enter in the IP Address for the WAN interface for the MultiCom Firewall.
This address must be on the same subnet as the IP Address of the broadband
modem. For instance if your modem 10.0.0.138 then your WAN interface
would probably have and IP Address of 10.0.0.1 .
7. Enter in the Subnet Mask of the broadband modem.
8. Click the
Next
button and goto the Section “LAN Easy Setup” on page 63.
WAN Static IP Easy Setup
In some cases your Internet Service Provider will have you configure all of the
necessary information manually. This is common when you are assigned a static
IP address that will not change. The needed configuration information is
available from your Internet Service Provider. Below are the steps necessary to
configure a Static connection.
In a Static IP connection all Internet parameters such as the MultiCom Firewall’s
IP address, IP subnet, default gateway, and external DNS servers must be
manually configured. If your ISP has told you to manually configure your WAN
interface this is where you will enter in the information that they send you.