![Lightning SA MultiCom Скачать руководство пользователя страница 97](http://html1.mh-extra.com/html/lightning-sa/multicom/multicom_user-manual_1912263097.webp)
MultiCom Firewall User’s Manual 97
Common Local Network Problems
Common Local Network Problems
Please look over these common reasons for networking problems. Additionally,
please check the section below relating specifically to your type of connection
(DHCP, PPPoE, PPTP, Static IP addresses.)
Once you know that your cabling is okay it is time to ask some more detailed
questions.
•
Is the modem working? (check the diagnostics that came with the modem,
maybe you can check LED displays or communicate directly with the
modem)
•
Is TCP/IP installed on your computer? (if you can ping 127.0.0.1 in a telnet
window/ DOS window TCP is installed)
•
Is the firewall reachable? (using the ping command for instance in a telnet
window/ DOS window and try PING 10.0.0.1 where 10.0.0.1 is the IP
Address of your MultiCom Firewall’s LAN interface.) Sometimes a Filter or
recent configuration change can block access to the Firewall.
•
Did you try using an IP address (such as http://193.247.134.2) to reach a web
site. If it does then your DNS is not reachable and you should check with
your Internet Service Provider.
•
Is there another DHCP server on your Local Network in addition to the one
on the MultiCom Firewall? If so you can only have one so you must disable
one of them.
•
Were you using an analogue modem before connecting the Broadband
modem? Maybe you forgot to change the Internet Options of Windows. Be
sure that under the Control Panels>Internet Connections>Connections the
“Never dial a connection” is activated or your computer will keep trying to
use the modem.
•
If you are using more than one Ethernet card on your computer be sure that
you do not have more than one default route.
•
Are there other devices on your network using the same IP Address as the
MultiCom Firewall’s LAN interface (10.0.0.1) the IP Addresses being given
by the Firewall’s DHCP server?
•
If you are using a Static IP on your Local Network make sure that each of
your workstations are configured to be on the same subnet as the MultiCom
Firewall and use the Firewall as their default Gateway.
Содержание MultiCom
