Lighthouse Remote 2014P, Руководство по эксплуатации

Страница: 16 / 80

Lighthouse REMOTE 2014P, 3014P, 5014P Operating Manual
2-2 248083408-1 Rev 1
The resulting pulse is measured for width and height. The width of the
pulse is proportional to the time it takes the particle to cross the laser
beam. The height or amplitude of the pulse is equal to the amount of
light scattered by each particle and is proportional to its size.
These pulses are processed by additional electronics that analyze their
height to determine the size of the corresponding particle. This allows
counting of the particles and grouping based on their size.
The REMOTE 2014, 3014P and 5014P are effective in both ultra-clean
areas (such as Class 1 or Class 10) and also in more traditional
cleanzones rated as Class 100 or higher. They were designed for
continuous 24/7 operation. Data is stored in a rotating buffer of 3000
records that can be downloaded real-time or manually as required.
Using an internal pump, the instrument can be installed where space is
limited. The REMOTE 2014P, 3014P or 5014P integrate seamlessly
into large facility monitoring/management systems and transfer up to 6
channels of simultaneous particle count data using RS-485/MODBUS
output. Refer to Specifications in this chapter for additional instrument
information.
The manufacturer recommends that your Lighthouse instrument be
calibrated annually by a Certified Lighthouse Service Provider to
ensure it continues to perform within specification.
Accessories
You can order several accessories to tailor the instrument to your needs.
Please contact your Lighthouse Sales Engineer for detailed additional
information.
Annual
Calibration
The manufacturer recommends that your Lighthouse instrument be
calibrated annually by a Certified Lighthouse Service Provider to
ensure that it continues to perform within specification.
When Calibration comes due, the Service LED will illuminate and stay
ON during sampling mode until the instrument has been calibrated.