Lighthouse ApexP3, Руководство по эксплуатации

Страница: 66 / 130

Lighthouse ApexPortable Operating Manual
5-36 248083440-1 Rev 5
•
Apex Portable
will prompt the user, "Move to LOC***?", as
shown in Figure 5-57. A ’Yes’ response allows the instrument to
change location to the next.
•
If the current location is using a unique recipe, the user will be
prompted if OK to unload the recipe before changing to the next
location. If the user presses ’YES’, it will unload the recipe.
• If the response is ’NO’, the instrument will use the current
recipe and switch location.
• If the new location is associated with a different recipe or
report, the
Apex Portable
will prompt to load the new recipe.
If the response is ’YES’, the recipe/report associated with the
new location will be loaded.
• If the user presses ’NO’, it will continue to use the current
recipe to sample the next location. Regardless, the user must
press the
Apex Portable
MAIN screen Start button to continue
sampling.
Remote
Operation
The
Apex Portable
can be remotely operated by the different LMS data
retrieval and facility monitoring software products, such as LMS
Express RT, LMS Net, LMS Professional and LMS Pharma. Remote
data retrieval via these products is easy and can be automated with
warning levels and alerts programmed to notify specific users or other
facilities. Visit www.golighthouse.com or contact Lighthouse Sales for
additional information and details.
Data View
Buffer Screen
Data stored on the instrument is viewed in the Data View Buffer. New
records overwrite the first records stored after the buffer fills to its limit
(3000 records). An asterisk (*) next to the word "Records" on the
MAIN screen indicates the Buffer is full and data has wrapped. The
first record shown in the Data View Buffer after data has wrapped will
be the most current record and not the first record stored. In this case,
older data will be lost if it hasn’t been printed or transferred to a PC or
management system.
Particle concentration data displays and prints in ft
3
if the Particle
Volume is set to ft
3
(cubic feet). If the Particle Volume is set to m
3
or
liters, data displays and prints in m
3
(cubic meters).