Lighthouse ApexP3 Скачать руководство пользователя страница 34

Страница: 34 / 130

Lighthouse ApexPortable Operating Manual

5-4

248083440-1 Rev 5

•

RECIPE button:

Allows the user to view, load and unload recipes

that have been configured and saved in the recipe data base via an

Abbreviated Receipe Screen. To edit the recipe or to add or delete

recipes, use CONFIG, which can be password-protected, from the

MAIN screen (see Figure 5-47). The CONFIG password is not

required here.

•

Last-Sampled Record Print/USB Save:

Indicates attached printer

or flash drive to be used to output the Last-Sampled Record

currently on the screen. Press the Print ICON to send to the

attached printer or USB ICON to send to flash drive. Restart will

clear the screen and nothing will be output.

•

Date/Time:

Displays the current date and time.

Note:

Users can continue to

run samples and take counts
while the unit is plugged in.

•

Battery ICONs:

Indicate that the instrument is being powered by

the rechargeable battery or its external power supply. The amount

of battery life left is depicted by the fill inside the battery icon and

the percentage above the icon. When the battery reaches 20%

charge, the ICON will start blinking and display a "BATTERY

LOW!" message. When it reaches 5% and the user tries to run a

sample, the large "Depleted" ICON shown on the left is displayed

and the unit will not run the pump until instrument is attached to the

external DC power supply for recharging.

•

While connected to the power supply, the battery icon changes to

indicate charging. See Figure 5-4.

Figure 5-4 Battery Levels, On-Battery and Charging

WARNING:

If the Air

Flow is insufficient, check
for and remove any
obstructions. If the issue
persists, turn the Apex off
and contact Lighthouse
Worldwide Solutions
technical support at 1-800-
945-5905 (USA Toll Free)
or 1-541-770-5905
(Outside of USA).

•

Flow Status:

When the instrument is COUNTING, the Flow ICON

(left of battery) appears and displays sufficient or insufficient flow.

•

USB:

Indicates that a USB printer or flash drive is attached.

Depleted Battery
Warning ICON

Full and

Depleted and

Charging

Depleted

Full

On-Battery

Charging

Insufficient

Sufficient

Содержание ApexP3



































































































































Результаты поиска

Содержание ApexP3

Отзывы:

Lighthouse ApexP3, Руководство по эксплуатации, Страница: 34 / 130

Результаты поиска

Содержание ApexP3

Отзывы: