Lighthouse ApexP3, Руководство по эксплуатации, Страница: 51 / 130

Operate the ApexPortable
248083440-1 Rev 5 5-21
WARNING:
Be
careful to touch the
screen at the specified
locations, only. Touching
the screen elsewhere
during this process will
align the screen
incorrectly.
• The screen in Figure 5-30 appears. Touch anywhere on the screen
to continue calibration.
Figure 5-30 Display Calibration Start Screen
Note:
Using a PDA Stylus
provides higher accuracy to
the touch screen interface.
• At the next screen, touch in the center of the cicle displayed in the
upper left corner. Release the touch to move to the next alignment
circle. The tip of a stylus is suggested to successfully complete the
alignment by being on-target more accurately than by using a finger
tip. Exercise care to prevent puncturing the screen’s membrane,
which will void the instrument warranty. Figure 5-31 shows the
second and third Calibration screens.
Figure 5-31 Second and Third Calibration Screens
• The fourth and fifth alignment screens are shown in Figure 5-32;
Performing touch
screen calibration.
Touch screen to
continue.
Press & Release
on the filled
circle.
Press & Release
on the filled
circle.
Touch as close to the center as possible.