14
X
SECTION 3 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
3.1
3.2
• Insert two
Carriage Bolts (EAP)
through the
Rim Pivot Bracket (APY)
as shown.
• Use the 1/2” socket head from a socket wrench to press one
Push Nut (AAQ)
onto one end of the
Axle (ABQ)
.
• The Push Nut should rest about 1/8” from the end of the Axle.
If the Push Nut slips on too far, continue sliding it to the other
end of the Axle to remove it and try again.
(Not to scale)
EAP
(x2)
APY
(x1)
AAQ
(x1)
ABQ
(x1)
(Not to scale)
EAP
EAP
APY
AAQ
ABQ
1/2” Socket Head
1/2”
(x2)
!
