15
X
SECTION 3 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
3.3
3.4
• Slide the end of the
Axle (ABQ)
through the
Rim (ALX)
and the
Rim Pivot Bracket (APY)
. Press the
Push Nut (AAQ)
onto
the end of the Axle. Use the 1/2” socket head to secure the Push Nut if needed.
• Insert the
U-Bolt (AOU)
through the
U-Bolt Support Bracket (DFD)
and into the upper part of the opening on the backside
of the
Backboard (AJI)
as shown.Connect the
Rim (ALX)
and
Plastic Guard (ALD)
to the
Backboard (AJI)
with the hardware
shown. Secure the
Nylock Flange Nuts (ABK)
onto the
Carriage Bolts (EAP)
.
ABK
(x2)
AAQ
(x1)
1/2”
APY
ALX
ABQ
ABQ
AAQ
APY
ALX
ABK
ALD
EAP
AJI
AOU
(x1)
AOU
DFD
1/2”
(x2)
