8
• After the Poles have been seated, insert two
#10 x .62” Self-Tapping Screws (CMV)
into the back of the Pole as shown.
1.7
CMV
(x2)
• For ease of installation, chuck the
Self-Drilling Screws directly into the
drill if your drill (see Figure 1, not
available on all drills), or use a 3/8”
Hex Driver (see Figure 2, Hex Driver
not included).
!
TOOLS AND HARDWARE REQUIRED
X
SECTION 1 (CONTINUED)
ALH
ALF
ALE
CMV
Figure 1
Figure 2
