16
X
SECTION 3 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
3.5
3.6
AAV
(x2)
• Slide the
Compression Springs (AJW)
onto the U-Bolt, and place the
Spring Retainer Plate (AOW)
over the Compression
Springs. Tighten the
Nylock Flange Nuts (ABK)
until the
Rim (ALX)
does not wobble to complete this step.
(Not to scale)
ABK
(x2)
AJW
(x2)
AOW
(x1)
(Not to scale)
AJW
AOW
ABK
• DO NOT COMPLETELY TIGHTEN THE NYLOCK FLANGE NUTS IN
THIS STEP! Only tighten the Nuts until the Rim (ALX) does not
wobble. Tightening the Nuts will adjust the Rim tension.
!
AJW
AAV
AOU
AOU
• Thread the
5/16” Jam Nuts (AAV)
all the way down on the
U-Bolt (AOU)
as shown.
!
1/2”
(x2)
