Step 1: Unpack
Remove the washing machine from the bottom of the package and place it in an
appropriate position. Open the cover and take out the accessories from the washing tub.
( Do not test the machine or wash anything on the foam packing pad. )
Step 2: Install Bottom Cover
Put the side similar to “ ” up, and gently insert it from the back of the washing machine
until you hear a "click" sound.
Step 3: Level Your Washer
See if the washer is leveled by checking the position of the tub or using a leveling gauge.
1. Slide the washer into position.
2. Open the lid of the washer, and pour the water into the tub to just below the pulsator
level.
3. If the washer is leveled, the pulsator is positioned at the center of the washer as shown
in the figure. If not, level your washer by turning the front leveling feet clockwise or
counterclockwise as necessary.
PRODUCT INTRODUCTION
PACKAGE INCLUDE
Top Cover
Filter
Outer Cylinder
Control Panel
Washing Tub
Body
Adjustable Nut
Washing Machine
* Please check whether the accessories in the above picture are complete. If the washing
machine is damaged or incomplete during transportation, please contact the seller timely.
Drain Pipe Assembly
Owner's Manual
Quick Connection Adaptor
Bottom Cover
Water Supply Hoses
Base
Drain Pipe
Bottom Cover
Pulsator
Power Plug
Groove
Bottom Cover
Faucet
Inlet Pipe
Power Cord
INSTALLATION AND ADJUSTMENT
- 5 -
- 6 -
WASHING MACHINE
PRODUCT USE GUIDE
T663
