COMMON PROGRAM DESCRIPTION
Standard
Name
The program mainly washes dirty clothes that need to be changed
frequently.
The water flow is weak, which is used to wash thin or clean clothes.
Gentle
The program is used to wash clothes that are not too dirty, and the
washing time is shorter.
Speedy
Before washing, let the clothes fully soak, so that the washing powder
can completely dissolve and penetrate the fibers of the clothes; during
the soaking process with interval rotation, the stains can be easily
disintegrated, and the cleaning effect is better.
Soak
Descripton
FAULT DETECTION GUIDE
E0
Digital instructions
Cause
Manual power off or the water
level sensor is repaired normally.
Open the top cover, press the "no
water" item in the "abnormal
phenomenon and disposal method"
to overhaul, then close the top
cover to release the alarm.
E1
Open the top cover, perform
inspections in accordance with
the item "No water" in "Abnormal
phenomenon and solution", and
then close the top cover to release
the alarm.
E2
Close the top cover to release the
alarm.
E3
Open the top cover, level the
clothes in the washing tub, and
then close it to release the alarm.
E4
Close the top cover to release the
alarm.
The water level sensor is
abnormal or the plug is loose.
The water level is still less
than the set water level after
filling or for 20 minutes.
After draining for more than
5 minutes, it still cannot drop
to the set water level.
The lid is opened during spin.
Dehydration imbalance alarm.
The door cover is opened
during the operation of the
child lock.
E5
Solution
Spin
Only the spin program, no washing or rinsing process. It is a program
selected according to needs.
By the suction effect of the high-speed rotation of the barrel, the wet
clothes are further dehydrated, which is drier than ordinary spin.
Air Dry
4. Start / Pause
After selecting the program, press "Start/ Pause" to work.
During operation, press "Start/ Pause" to pause the operation, press it again to continue
the program until the remaining time is completed.
If you want to change the contents of "program", "process" and "water level" during
operation, you must frist press "Start/ Pause". Press it again after changing the settings,
the program will continue to run until the end.
5. Child Lock
Setting method: In normal operation, press the "Water Level" and "Program" buttons at
the same time, the child lock is turned on, and the other buttons except the "Power" button
become invalid.
Releasing method: In the child lock state, press the "Water Level" and "Program" buttons
at the same time to release the child lock function.
Washing machine energy efficiency test program:
Normal procedures are used for energy efficiency testing, and 3 water levels are used for
half load.
- 15 -
- 16 -
