USER'S GUIDE
Description Of the Control Panel
1. Power
When the washing machine starts, press the "Power" button to trun on the power, and
the washing machine enters the initial working state.
When running or paused, press the "Power" button to cut off the power, and the washing
machine is in standby working state.
If the machine does not start within 10 minutes, it will automatically cut off the power. After
washing, it will beep and automatically cut off the power.
2. Program
During the pause or standby process, press the "program" button to choose the desired
program: 01—Standard, 02—Spin, 03—Quick, 04—Soak, 05—Gentle, 06—Air Dry,
07—Retain Water, 08—Tub Clean.
The "program" is invalid during running, and it can be changed during pause.
The timing will be restarted after changing the program.
3. Water Level
(1). The water level defaults to "3 gears" no matter it is the initial state of the start or the
program selection.
(2). When the machine is just turned on or paused in the middle, press the "Water Level"
button to select the water level, and the appropriate water level can be selected according
to the amount of clothes. Gears 1, 2 are low water levels, gears 3 and 4 are medium
water levels, and gears 5 and 6 are high water levels. During "Speed" and "Spin", the
water level is not adjustable.
(3). "Speedy" is a fixed program, and the water level is not adjustable.
(4). During washing (including rinsing), if you want to add water, press the "Start/Pause"
button, then press the "Water Level" button to select a higher water level, and press the
"Start/Pause" button. The washing machine will automatically replenish water to a higher
level. If the changed water level is lower than the current water level in the bucket, it will
continue to run without replenishing water after the suspension is started, and the changed
low water level will be executed next time when there is a water intake action.
(5). Automatic water replenishment: During the process of "Soak", "Wash" and "Rinsh", if
the washing machine detects that the water level has dropped to the set water level, the
washing machine will stop working and then continue to run after automatically
replenishing water to the set water level.
Precautions
1. When installing the washing machine, be sure to remove the transport base and
bracket at the bottom of the washing machine, otherwise it cannot be used.
2. During installation or initial use, a small amount of water will flow out of the drain pipe,
which is the residual water during routine inspection of the factory.
3. When the washing machine is finished, please unplug the power plug and turn off the
faucet to prevent accidental fire and water leakage.
- 13 -
- 14 -
Standard
START / PAUSE
Remain (min)
Indicate Detergent
WATER LEVEL
CHILD LOCK
PROGRAM
POWER
Spin
Speedy
Soak
Gentle
Air Dry
Retain Water
Tub Clean
