Abnormal Phenomenon
- The faucet is not turned on.
- Inlet valve filter is clogged.
- Water pressure is too low
or water is cut off.
- Turn on the faucet and press
the "Start/Pause" button.
- Clean the water inlet valve and
press the "Start/Pause" button.
- When the water pressure
reaches the allowable value,
use it again.
No water or too slow.
- The washing machine is
tilted.
- Dehydrated clothes are
placed on the wrong side.
- There are foreign objects
such as coins in the
washing machine.
- Level the washing machine.
- Organize clothes.
- Remove foreign objects from
the washing machine.
The washing machine
makes a weird noise
- Power failure.
- The power plug is not
inserted tightly.
- The power socket is dead.
- The power switch button
is not pressed.
- Use it after power on.
- Plug in the power plug tightly.
- Check the power socket or
change another socket.
- Press the power switch button.
The washing machine
does not work.
Light does not shine.
- Do not put the drain pipe
down or the outlet is too
high.
- The drain pipe is blocked,
bent or kinked.
- Lower the drain pipe,
reopen and close the cover.
- Remove foreign objects or
unblock the drain pipe,
reopen and close the cover.
Not draining or draining
too slowly.
Possible Cause
Solution
Common Phenomenon
- Adjust the balance to prevent the clothes
from being misplaced.
When spin starts, it occurs intermittently.
- The washing machine program sets the
drain time, and the dehydration starts
after a period of time.
When you press the "Process" button
and select "Spin", the washing machine
will not spin.
- This is the remaining water during the
factory inspection of performance.
When using the washing machine for
the first time, a small amount of water
may flow out of the drain pipe.
- The safety switch operates because the
laundry is biased to one side. Filled it with
water and agitated, the deviation of the
laundry is eliminated and the dehydration
is performed again.
In the final spin, the display becomes
rinse and water-in.
Cause
- The screw of the water
inlet pipe joint (connecting
with the faucet) is loose or
offset.
- The joint between the
water inlet pipe and the
water inlet valve of the
washing machine is not
tightened.
- Correctly tighten the joint
screws.
- Tighten the water inlet valve
connector of the washing
machine.
Water leakage at the
water inlet pipe joint
- Laid-down clothing causes
the safety switch to operate.
- The tilting of the washing
machine caused the safety
switch to operate.
- The top cover is not closed
after draining.
- Open the lid again after the
dehydration starts.
- Reorganize the clothes and
close the lid.
- After the washing machine is
placed horizontally, reopen and
close the top cover.
- Close the top cover.
- Close the top cover.
Do not spin
TROUBLESHOOTING GUIDE
- 19 -
- 20 -
