manualshive.com logo in svg

Life Fitness Hammer Strength HD Elite Power Rack, Инструкция по сборке и руководство пользователя

Power Rack Life Fitness Hammer Strength HD Elite - качественный тренажер для тренировок с отягощениями. Скачайте сборочные инструкции и руководство владельца бесплатно на нашем сайте. Каждый может легко собрать и начать пользоваться этим надежным оборудованием для тренировок. {Скачать здесь}

Поделиться
Скачать
background image

3

1

 

Safety Information

I

t is the sole responsibility of the purchaser of HAMMER STRENGTH products to read the owner’s manual and warn-

ing labels and instruct all individuals, whether they are the end user or supervising personnel, on proper usage of the 
equipment.

UNDERSTANDING EACH AND EVERY WARNING TO THE FULLEST IS IMPORTANT. IF ANY OF THESE WARNINGS ARE 
UNCLEAR, CONTACT LIFE FITNESS CUSTOMER SERVICE IMMEDIATELY AT 1-800-735-3867. 

This equipment is categorized as class S per EN ISO 20957-1. As such this equipment is only intended for commercial, 
institutional and/or studio facilities. It is not intended for home use. Contact LIFE FITNESS with any questions regarding 
this classification.

It is recommended that all users of HAMMER STRENGTH exercise equipment be informed of the following information 
prior to use.

Health and Environmental Regulations Warning - This product may contain chemicals known to the State of California 
to cause cancer, birth defects, or other reproductive harm. For more information related to the European Commission 
Regulation (EC) No. 1907/2006 (REACH) and the California Safe Drinking Water and Toxic Enforcement Act of 1986 
(Proposition 65), please visit https://www.lftechsupport.com/web/guest/environmentalregulations-information.

ACCESS CONTROL

HAMMER STRENGTH recommends that all commercial fitness equipment be used in a supervised area. It is rec-
ommended that the equipment be located in an access controlled area. Control is the responsibility of the facility 
owner.  
This equipment is not intended for use by children.  Keep children under the age of 13 away from the equipment.  

INSTALLATION

SECURING EQUIPMENT - HAMMER STRENGTH recommends that all equipment be secured to a solid, level surface 
to stabilize it and eliminate rocking or tipping over. This must be performed by a licensed contractor.

PROPER USAGE

1.  Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that 

HAMMER STRENGTH equipment is used properly to avoid injury.

2.  Injuries may result if exercising improperly or excessively. It is recommended that all individuals consult a physi-

cian prior to commencing an exercise program. If at any time during exercise you feel faint, dizzy or experience 
pain, STOP EXERCISING and consult your physician.

3.  Keep body parts (hands, feet, hair, etc.), clothing and jewelry away from moving parts to avoid injury.

4.  When adjusting any seat, knee hold down pad, range of motion limiter, foothold pad, pulley or any other type 

of adjuster, make certain that the adjusting pin is fully engaged in the hole to avoid injury.

INSPECTION

1.  DO NOT use or permit use of any equipment that is damaged and/or has worn or broken parts. For all HAM-

MER STRENGTH equipment use only replacement parts supplied by HAMMER STRENGTH.

2.  Cables pose an extreme liability if used when frayed. Always replace any cable at first sign of wear (consult LIFE 

FITNESS if uncertain).

3.  MAINTAIN LABELS AND NAME PLATES - Do not remove labels for any reason. They contain important informa-

tion. If unreadable or missing, contact LIFE FITNESS for a replacement.

Содержание Hammer Strength HD Elite Power Rack


































































Отзывы:

Нет отзывов

Похожие инструкции для Hammer Strength HD Elite Power Rack

ACS 3200 Series Operation And Instruction Manual preview
3200 Series
Бренд: ACS Страницы: 56
Bartscher 700 Series Instructions For Installation, Use And Maintenance Manual preview
700 Series
Бренд: Bartscher Страницы: 22
B&K DT1 Owner'S Manual preview
DT1
Бренд: B&K Страницы: 8
Malmet Drying Cabinet Operation, Maintenance And Installation Manual preview
Drying Cabinet
Бренд: Malmet Страницы: 14
Zempire EVO Series Pitching Instructions preview
EVO Series
Бренд: Zempire Страницы: 2
ACDC Mondo Installation Instructions preview
Mondo
Бренд: ACDC Страницы: 4
Keiser M SERIES Manual preview
M SERIES
Бренд: Keiser Страницы: 82
Keiser M SERIES Calibration Instruction preview
M SERIES
Бренд: Keiser Страницы: 4
Garelick 19250 Installation Instructions preview
19250
Бренд: Garelick Страницы: 2
Garelick 74002 Assembly And Installation Instructions preview
74002
Бренд: Garelick Страницы: 2
RayLight HERA Technical Document preview
HERA
Бренд: RayLight Страницы: 34
Gazelle GAZELLE FREESTYLE User Manual preview
GAZELLE FREESTYLE
Бренд: Gazelle Страницы: 10
Latham ECLIPSE Installation Manual preview
ECLIPSE
Бренд: Latham Страницы: 19
EarthQuaker Devices The Wave Transformer Manual preview
The Wave Transformer
Бренд: EarthQuaker Devices Страницы: 21
IDEAL Networks LanTEK IV User Manua preview
LanTEK IV
Бренд: IDEAL Networks Страницы: 60
IceCure IceSense3 User Manual preview
IceSense3
Бренд: IceCure Страницы: 104
Naked NKD1 Installation & Operating Manual preview
NKD1
Бренд: Naked Страницы: 36
Raymarine ST60+ SPEED INSTRUMENT Owner'S Handbook Manual preview
ST60+ SPEED INSTRUMENT
Бренд: Raymarine Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды