6
7
NOTE TO THE CATV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guide-
lines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
ANTENNA GROUNDING ACCORDING TO THE NEC
Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70.
1. Antenna lead in wire
2. Antenna discharge unit (NEC Section 810-20)
3. Grounding conductors (NEC Section 810-21)
4. Ground clamp
5. Power service grounding electrode system (NEC Article
250, Part H)
6. Ground clamp
7. Electric service equipment
REMOTE CONTROL CONFIGURATION
Tools Required:
Metric Allen Set
Mount the PIVOT DISC (A) and FRONT BRACKET (B) to the back of the REMOTE CONTROL (C) using one SCREW (D).
Leave the screw loose at this time.
Select a user accessible location to mount the remote control. Position the remote with bracket at the desired location.
Pivot the remote as necessary for optimal user access.
Note:
If the desired location is such that the bracket will not work for mounting, remove the front bracket and reinstall
the pivot disc. The remote can now be installed using the two CABLE TIES (E) or fastener discs provided with the remote.
Be sure the pivot disc is oriented to accommodate the mounting surface.
Tighten the screw to secure the pivot disc and front bracket to the
remote.
Reposition the remote with bracket in the desired location and se-
cure the remote to the equipment using the REAR BRACKET (F) and
two SCREWS (G). Tighten the screws securely.
Note:
Two differing length of SCREWS (G) are included to
accommodate various mounting thicknesses.
Note:
The REMOTE CABLE (H) can be routed through any of two
cable routing channels in the back of the remote or around the pivot
disc.
MEDIA CONNECTIONS: NTSC / ATSC / QAM with PRO:IDIOM
Description
Connector Type
Power In
12 Volt DC Power In
Power Jack
MTI
Lodgenet Box Connection
RJ45
Network In
Internet Connection
RJ45
USB
USB Flash Drive
USB Type A
High-Definition Input
High-Definition Audio & Video Connection
High-Definition
S-Video
S-Video Signal In
S-Video
Video In
Video In
RCA
(yellow)
Audio In
Stereo Line In
RCA
(red and white)
RF Coaxial
Antenna / Cable Connection
RF F-Type
Wired Remote /
Media Cable
Wired Remote Control Connection
Remote Control
Audio Out
Headphone Connection
3.5mm stereo jack, 0.3W
F
B
A
H
C
E
D
G
12VDC
MTI
Hi-Def
CATV
CVBS
Power In
MTI Network In USB Hi-Def Input S-Video Video In
Audio In
RF Coaxial Wired Remote /
Media Cable
Audio Out
Содержание ATV15-XXXA-02
Страница 1: ...1008767 0001 AA 15 ATTACHABLE TV ASSEMBLY INSTRUCTIONS ...
Страница 2: ......
