Life Fitness ATV15-XXXA-02, Руководство по сборке

Страница: 35 / 36

64 65
25. Secure the attachable TV (4) to the main bracket assembly
using the bolt (1) , washer (2), and nut (3).
26. Connect the cables to the attachable TV (4).
27. Align the lowest side holes on the TV brackets (3) and
main bracket assembly (2).
28. Secure the TV bracket (3) into position using one screw (1)
on each side of the TV bracket.
29. Connect the remote cable (1), high-def cable (2), and power cable (3) to the ports on the back of the console.
30. Reinstall the console.
Model: 95FS
Tools Required: Metric Hex Key Set, Screwdriver, Side Cutters, T-45 Torx Wrench
Note:
Proceed with the following steps before attaching the DISPLAY CONSOLE as described in the CLSX
Assembly Instructions.
1. Remove the four SCREWS (a) and COVER PLATE (b) located on the CONSOLE SUPPORT BRACKET TUBE (c).
Note:
Some models may have a plastic end cap instead of a cover plate.
2. Unwrap the power SUPPLY CORD (d) and COAXIAL CABLE (e) located within the
CONSOLE SUPPORT BRACKET TUBE (c). Route these cables through the
OPENING (f) of the TV MOUNTING BRACKET (g).
3. Locate the AUDIO / VIDEO / I-R REMOTE CONTROL CABLE (h). Route this
CABLE ASSEMBLY through the TV MOUNTING BRACKET with the 2-connector
end coming out the OPENING (f) of the TV MOUNTING BRACKET (g).
4. Secure the TV MOUNTING BRACKET (g) with four SOCKET HEAD SCREWS (s)
onto the CONSOLE SUPPORT TUBE (c).
CAUTION:
Do not pinch any cables when inserting the TV MOUNTING BRACKET
into the CONSOLE SUPPORT TUBE.
5. Install the ATTACHABLE TV (i) onto the TV MOUNTING BRACKET (g) using four
nylon SHOULDER WASHERS (j), four FLAT WASHERS (k) and four SCREWS (l).
6. Insert other end of the AUDIO / VIDEO / I-R REMOTE CONTROL CABLE
ASSEMBLY (h) into the console connector.
a
b
c
i
d
e
h
f
g
s
c
h
j
k
l