Life Fitness ATV15-XXXA-02, Руководство по сборке

Страница: 13 / 36

20 21
11. Attach TV (s) to PRIMARY TV BRACKET (q) using four M6 SCREWS (t) and M6 WASHERS (u). Secure the CAP (v) to
the top of the PRIMARY TV BRACKET (q).
12. Secure the REMOTE CONTROL to the TOP CONSOLE TRAY using the provided DUAL LOCK.
13. Use a minimum of three CABLE TIE MOUNTS (w) to secure the remote control cable,
power cable, and coaxial cable.
Suggested Cable Tie Mount Locations:
The picture shows suggested placement indicators for the provided Cable Tie Mounts.
Models: INTSC, INTSX, INTDX, Integrity
Tools Required: Phillips Screwdriver, Metric Allen Set, M16 & M17 Wrench
Parts Not Used From Kit: (1) Lower Mounting Bracket
2. Lift and remove the motor cover.
3. Remove the two zip ties that connect the power supply
brick to the electrical bracket.
4. Disconnect the wire that attaches to the power supply brick
to the PCB board.
5. Unplug the power connection from the power supply brick.
6. Insert the 60 V power block.
NOTE: Insert the power block with cable facing the front of the
unite and the power connection facing the back of the machine.
7. Reattach the wire to the PCB board.
8. Reattach the power supply to the power suppy brick.
9. Secure the power supply brick to the electrical bracket us-
ing the zip ties.
10. Reinstall the motor cover.
11. Reinstall the screws for the motor cover.
1. Remove the two screws (1) securing the motor cover.
12. Remove the two screws (1) that secure the rear console
cover (2) to the console frame.
13. Unclip, and remove the rear console cover (2).
14. Remove the four screws (4) that secure the insert (3).
15. Remove the insert (3).
16. Remove the four screws (5) that secure the console (7) to
the console frame (6).