LIFAN Power USA ENERGY STORM ESI2500iER-EFI-CA, Инструкция по эксплуатации и руководство пользователя

Страница: 28 / 107

L I F A N P O W E R U S A Page 27
Operation of Generator
HOW TO USE YOUR GENERATOR (continued)
ELECTRIC/PULL (RECOIL) START MODELS:
4. Using provided key, turn the ignition switch to the “ON” position. Rotate the key one more position to the
“START” position in order to engage the starting motor. Hold key switch in the “START” position until engine
starts, for NO MORE than 10 engine rotations. If the engine does NOT start, repeat procedures beginning
with Step One (1).
REMOTE START MODELS:
7. Place the remote start switch on the control panel in the “ON” position. CAUTION: Leaving the remote start
switch in the “ON” position for more than six hours without operation will result in a dead battery and the
inability to start the unit with the key switch or the remote start.
8. Double--­click and hold the “ON” button (marked with a lightning bolt) on the remote start until the engine
starts
NOTE (all models): If generator does not start within three pulls, check the crankcase oil level. The engine’s “Low
Oil Shutdown Protection” circuit may be activated and preventing the engine from starting.
NOTE (all models): Unit is equipped with an Automatic Choke and Stepper Motor controlled by the ECU.