DL-SC41UP-BXTX Installation Guide
15
The
CONTROL
menu allows you to route A/V signals from the video inputs to the HDMI output of the switcher
and enable / disable auto switching mode.
To enable / disable auto switching mode, check the
ON/OFF
button in the
Auto Switching
option. When auto
switching is disabled, the switcher must be switched manually by either using the front panel buttons, the
embedded web GUI or with the API. By default the DL-SC41UP-BXTX is set to auto switching mode and follows
the ‘first in last out’ method. To use
5V
HDMI or A/V
Signal Detection
for auto switching mode, check the desired
button in the
Auto Switching
option, the setting will take immediately. By default auto switching is set to 5V
HDMI for the auto switching trigger.
A/V Switching
