DL-SC41UP-BXTX Installation Guide
17
The
DISPLAY SETTING
>
DISPLAY
menu allows you to enable / disable automatic display ON/OFF control.
When display control is ON, the DL-SC41UP-BXTX can turn the display or projector ON using the stored RS232
commands previously set up in the
DISPLAY SETTING > RS232
menu or by CEC when an AV signal is introduced
to either of the switchers inputs. When an AV signal is not present after a specified time, the DL-SC41UP-BXTX
can generate the saved RS232 OFF command as well as CEC to turn OFF the display or projector.
Auto Display ON/OFF Settings
By default the
DISPLAY CONTROL
option is
ON
, press the ON toggle button to disable
AUTO
DISPLAY CONTROL
To set up the timeout parameters for turning the display OFF, navigate to
DISPLAY SETTING
page. Enter in the
time in minutes in the
NO SIGNAL TIMEOUT or NO ACTIVITY
form, then press SAVE.
