DL-SC41UP-BXTX Owners Manual
4
The DigitaLinx DL-SC41UP-BXTX is a 4x1 multi format A/V and USB conference auto switcher and table
pocket that supports video resolutions up to 4K@60Hz 4:4:4 8bit deep color and has a built in 4 port
USB 3.x hub for integration of USB devices such as USB cameras and microphones that can switched
between three USB (PC) hosts. The switcher features three video inputs; (3) HDMI and (1) USB-C. The
USB-C input supports video, data (USB host) and power charging up to 40w. The 4 port USB device
hub (2 top and 2 bottom) can switch between the USB (PC) hosts automatically or can be assigned to
follow a video input in auto switching mode so when the video input is triggered the corresponding
USB host will switch as well. AC power outlet located on front panel of product passes AC power 110-
240v, based on location power location, in US ~110-120V, in UK ~220-240v. The switcher features two
mirrored outputs; HDMI and HDBaseT 2.0. The built in HDBaseT 2.0 transmitter output supports long
distance transport of audio, video and High Speed USB 2.0 signals up to 190Mbps up to 70 meters /
232’ using one category cable. The switcher is compatible with the DL-SCU-RX HDBaseT 2.0 receiver
(sold separately).
The DL-SC41UP-BXTX gives you the ability to automate the display power ON by using pre-loaded RS232
commands whenever a video signal is introduced to the system using any A/V input or by pressing the
DISPLAY control button on the front panel. It will also turn the display power OFF after a specified
amount of time has passed when no video signal or switching activity is present.
The DL-SC41UP-BXTX can be controlled by API commands using RS232 or Ethernet. A web server /
GUI is built in that features A/V and USB switching control, automatic display control and input EDID
management.
The DL-SC41UP-BXTX is ideal for software based video teleconference rooms that require the
consolidation and sync of A/V and USB signals from a laptop or room PC.
NOTE:
The DL-SC41UP-BXTX switcher can be used as a standalone switcher or paired with an HDBaseT
receiver. The DL-SCU-RX HDBaseT 2.0 receiver (sold separately) is required to complete an extension
circuit. When using the DL-SCU-RX, only USB 2.0 Full Speed devices can be used on the receiver.
Product Overview
Product Contents
•
DL-SC41UP-BXTX 4X1 HDMI / USB Switcher
• (1) Cut out template
• (1) 3 pin Phoenix Male Connector
•
(2) Table mounting screws clamps
• (1) Cable lacing bar with screws
•
US, UK, EU and AU power cables