DL-SC41UP-BXTX Installation Guide
18
In the DL-SC41UP-BXTX there are three USB hosts that can be switched either automatically, manually or they
can be set to follow the video input automatically when the AV input is selected. By default, PC / HOST 1 USB
host follows HDMI 1, PC / HOST 2 host follows HDMI 2 and when connecting USB C device it also switches to
this input as a host.
To change the USB hosts to switch automatically based on USB signal detection on either PC 1, PC 2 or USB C
check the
AUTO SWITCH
option
To manually switch to the desired USB host check the
MANUAL
option and then choose which host to switch to
PC1 or PC2.
To set a USB host to follow a selected video input, select
FOLLOW VIDEO
and use the drop down buttons to
assign hosts to inputs. USB-C will always switch as the host when this input is selected
Press
CONFIRM
to save any settings
USB Host Switching Settings
