LI-COR AirLink RV50X, Инструкция по эксплуатации

Страница: 75 / 90

About the SmartFlux 2 System IP address
For the SmartFlux 3 System, the IP address is set in the gas analyzer software. In
contrast, the same action with the SmartFlux 2 System sets the IP address of the LI-
7550. Therefore, the SmartFlux 3 Address must be set in a different way. When the
SmartFlux 2 System has its IP address set in this way, not only does it function as
an NTP server for the system, it also enables two-way communication with the
Biomet Data Acquisition System (to load configuration files) and the ability to copy
PhenoCam images and raw biomet data files from the USB drive using the
Down-
load
utility or an SFTP client.
NTP communication with the SmartFlux System is established via Internet com-
munication protocols, and therefore, the SmartFlux 2 System IP address must be set
to use the feature (see
Setting the SmartFlux 2 System IP address via the RV50X on
page 4-11).
For the NTP server
Starting with embedded firmware software version 2.2.49, the SmartFlux 2 and 3
Systems have an NTP (Network Time Protocol) server, which is synchronized to
the timing of the data recorder. With the NTP server, the SmartFlux 2 or 3 System
clock is used to synchronizes clocks, rather than an NTP server on the Internet.
For file transfer functions
Setting the SmartFlux 2 System IP address via the RV50X software also enables the
transfer of both image files and raw Biomet Data Acquisition System files using the
Download
utility or an SFTP client. It also enables two-way communication with
the Biomet Data Acquisition System.
Appendix A. Additional considerations
A-7 About the SmartFlux 2 System IP address