LI-COR AirLink RV50X, Инструкция по эксплуатации

Страница: 57 / 90

Connecting to the LI-7700
This section describes how to connect with the LI-7700 from a computer with Inter-
net access. You will find this useful if you want to review the performance of the
instrument or alter the configuration.
1 On a computer that has Internet access, launch the LI-7700 configuration software.
2
Click the
Connect
button and select Ethernet.
In the
Select Instrument:
field, enter the
IP address
of the RV50X.
l
If the RV50X has a
Static IP
address, simply type it in (see Viewing the RV50X IP
address on page 4-4).
l
If the RV50X has a
Dynamic IP
address, retrieve the IP address from the DDNS
service provider (see Dynamic IP address on page A-5) and type it in.
3
Click
Connect
.
After connecting to the instrument you can check the performance and modify the
configuration as you normally would.
Section 5. Connecting with remote instruments
5-5 Connecting to the LI-7700