LGMG SR3369E, Руководство по эксплуатации и безопасности

Страница: 10 / 64

LGMG North America Inc. Operation and Safety Manual
4
Keep enough safety distance from the machine
to the power supply line and electric machine
according to the applicable government laws
and regulations, and instructions of the following
table.
Voltage
Required safety
distance
0-300 V No touching.
300V-50 KV 10ft
50 KV-200 KV 15ft
200 KV-350 KV 20ft
350 KV-500 KV 25ft
500 KV-750 KV 35ft
750 KV-1,000 KV 45ft
2) Beware of strong winds or gusts. Consider
the factors such as platform movement,
wire swing or droop.
3) If the machine contacts the wire with power,
please be far away from the machine. Staff
on the ground or platform is forbidden to
contact or operate the machine before
cutting off the power supply.
4) Do not operate the machine when there is
lightning or storm.
5) Do not use the machine as the ground wire
during welding.
1.7 Danger of Tip-Over
Staff, equipment and materials on the platform
cannot exceed the maximum bearing capacity
of the platform and extension platform.
Model SR3369E
Maximum
capacity
In door:
4people
Outdoor:
2 people
Maximum
operating
load of
platform
454kg/998.8bs 454kg/998.8lbs
Load of
extension
platform
140kg/308lbs 140kg/308lbs
Item SR4069E
Maximum
capacity
In door:
4people
Outdoor:
2 people
Maximum
operating
load of
platform
365kg/803lbs 365kg/803lbs
Load of
extension
platform
140kg/308lbs 140kg/308lbs
1.8 Safety of Work Area
1) The platform can only be raised on a solid
and flat level ground.
2) The speed shall not exceed 0.5km/h
/0.31mph when the platform is raised.
3) The inclination alarm cannot be regarded
as level indicator. When the machine is
seriously inclined, the inclination alarm of
the chassis and platform will ring.
4) If inclination alarm rings, lower the platform
and move the machine to a solid level
ground. If the inclination alarm rings when
the platform is raised, the platform shall be
lowered very carefully.
5
）
In case the machine is used outdoor, do not
lift the platform when the wind speed is
above 12.5m/s /28mph if the wind speed
exceeds the limit after lifting the platform,
please immediately lower the platform
and stop the machine operation.
6
）
Do not operate the machine in strong winds
or gusts. The surface area of the platform
or load cannot be increased. Increase of
the area exposed to the wind will reduce
the stability of the machine.