LGMG SR3369E, Руководство по эксплуатации и безопасности

Страница: 11 / 64

LGMG North America Inc. Operation and Safety Manual
5
7
）
In the raising state of the platform, the
machine cannot run on uneven terrain and
unstable surface, or in other dangerous
situations, or near these areas.
8
）
In the stow state, the machine must run very
carefully and reduce its speed when it
runs on uneven terrain, unstable or
smooth surface with stones, or the place
near the tunnel, or the steep slope.
9
）
Do not use the platform control unit (PCU) to
release the platform when the platform is
tripped, stuck, or its normal operation is
obstructed by other nearby matters. Before
using the ground control unit (GCU) to
release the platform, all staff must leave the
platform.
10
）
Don't push or pull anything outside the
platform.
11) Don't use the machine as a crane.
12) Don't place, fasten and fix or suspend loads
on any component of the machine.
13) Don't place ladders or scaffolds within the
platform or against any component of the
machine.
14) Don't attach platforms to adjacent buildings.
15) Don't change or disable limit switch.
16) Don't tie platforms to adjacent components.
17) Don't place loads outside the platform
guardrail.
18) Don't change or damage any component
that may affect the safety and stability of
the machine.
19) Don't replace key parts that affect machine
stability with parts of different weights or
specifications.
20) Don't amend or modify the mobile elevated
work platform. Install additional equipment
for placing tools or other materials on
platforms, pedals or guardrails, which will
increase platform weight and surface area
or load.
21) Don't push machines or other objects on
the platform.
22) Only transport tools and materials that are
evenly distributed and can be safely moved
by people on the platform.
23) Don't use machines on moving surfaces
and vehicles.
24) Ensure that all tires are in good condition
and nuts have been properly tightened.
25) Ambient temperature for machine operation
is -20
℃
~40
℃
.
26) The allowable fluctuation of machine power
supply voltage is ±10%.
1.9 Smashing and Pinching
Hazards
1) Do not place hands in areas that could
smash, pinch or cut them, and keep them
out of the scissor arms.
2) Don't place your hands in a position where
you may get pinched when folding the
guardrail.
3) Grasp the platform guardrail all the time
when removing the pins fixed on the
guardrail. Don't let the platform guard
railing fall off.
4) Please maintain good judgment and
planning when operating the machine with
controllers on the ground. Maintain a safe